TP-Link TL-POE160S PoE+ Injector

Standards Compliance: Fully supports IEEE 802.3af/at PoE standards.

Power Output: Supplies up to 30 watts of power to connected devices.

Ports:

1 x 10/100/1000 Mbps RJ45 data-in port

1 x 10/100/1000 Mbps RJ45 power + data-out port

1 x AC power socket

Data Transmission: Two Gigabit ports ensure fast data transfer.

Power Delivery: Automatically detects and supplies the exact power required by the powered device.

Installation: Plug & Play with no configuration needed; supports wall-mounting and desktop placement.

Network Media Compatibility:

10BASE-T: UTP Cat 3,4,5 and EIA/TIA-568 100Ω STP (max 100m)

100BASE-TX: UTP Cat 5,5e and EIA/TIA-568 100Ω STP (max 100m)

1000BASE-T: UTP Cat 5,5e,6 (max 100m)

Power Input: 100-240 V AC, 50/60 Hz.

LED Indicator: ON when supplying power normally; OFF when no power supply.

Dimensions: Approximately 4.9 x 2.3 x 1.4 inches (125 x 59 x 37 mm).

Certifications: FCC, CE, RoHS.

Operating Environment:

Temperature: 0°C to 40°C (32°F to 104°F)

Storage Temperature: -40°C to 70°C (-40°F to 158°F)

Humidity: 10% to 90% RH non-condensing (operating), 5% to 90% RH non-condensing (storage).

Package Contents: TL-POE160S injector, power cord, RJ45 cable, installation guide, wall-mounting kits.

Use Cases

Ideal for powering devices such as wireless access points, IP cameras, and IP phones where power outlets are unavailable.

Expands network reach by delivering both power and data over a single Ethernet cable, reducing cabling complexity and cost.