Ubiquiti NanoStation 5AC (5.8GHz) Wireless Bridge & WiFi AP


The Ubiquiti NanoStation AC (model NS-5AC) is a high-performance, outdoor wireless CPE (Customer Premises Equipment) designed for point-to-point (PtP) and point-to-multipoint (PtMP) links. It operates on the 5 GHz frequency band and supports 802.11ac Wi-Fi standards. This device is part of Ubiquiti’s airMAX AC series, known for long-range, high-throughput connectivity in rural or urban deployments. Specifications are based on official Ubiquiti documentation (available on their website as of 2023; confirm for latest updates).

Model NanoStation AC

Frequency Band: 5 GHz (5150–5875 MHz, varies by region)

Standards: 802.11ac Wave 1, airMAX AC protocol

MIMO Configuration: 2×2 MIMO

Antenna Gain: 16 dBi integrated directional antenna

Beamwidth: 45° azimuth, 45° elevation

Max Data Rate: 450 Mbps (PHY rate)

Transmit Power: Up to 25 dBm

 

10,800 EGP

The Ubiquiti NanoStation AC (model NS-5AC) is a high-performance, outdoor wireless CPE (Customer Premises Equipment) designed for point-to-point (PtP) and point-to-multipoint (PtMP) links. It operates on the 5 GHz frequency band and supports 802.11ac Wi-Fi standards. This device is part of Ubiquiti’s airMAX AC series, known for long-range, high-throughput connectivity in rural or urban deployments. Specifications are based on official Ubiquiti documentation (available on their website as of 2023; confirm for latest updates).

SKU: NS-5AC Category: Brand:

Hardware Specifications

Processor: Atheros MIPS 74Kc, 720 MHz

Memory: 128 MB DDR2 SDRAM, 16 MB NAND Flash

Interfaces:

1x Gigabit Ethernet port (10/100/1000 Mbps) with PoE support

1x Reset button

Power Supply:

Passive PoE (24V, 0.5A) via Ethernet port

Power consumption: 8.5W max

Dimensions: 163 x 31 x 80 mm (6.42 x 1.22 x 3.15 inches)

Weight: 0.25 kg (0.55 lbs)

Enclosure: Outdoor-rated plastic with UV protection; IPX5 weatherproofing

Mounting: Pole-mountable with included hardware; adjustable tilt

Wireless Specifications

Frequency Band: 5 GHz (5150–5875 MHz, varies by region)

Standards: 802.11ac Wave 1, airMAX AC protocol

MIMO Configuration: 2×2 MIMO

Antenna Gain: 16 dBi integrated directional antenna

Beamwidth: 45° azimuth, 45° elevation

Max Data Rate: 450 Mbps (PHY rate)

Transmit Power: Up to 25 dBm (adjustable)

Receive Sensitivity: -96 dBm at MCS0, -65 dBm at MCS15

Security: WPA2-AES encryption, airMAX proprietary security

Range: Up to 15+ km in line-of-sight conditions (depends on environment and configuration)

Software and Management

Operating System: airOS 8 (Linux-based firmware)

Management: Web-based UI, SNMP, SSH; supports Ubiquiti’s UNMS (Ubiquiti Network Management System) for centralized control

Features:

airMAX TDMA protocol for low-latency, high-efficiency multiplexing

Automatic Channel Selection (ACS)

Quality of Service (QoS) with traffic shaping

Firmware upgrades via web interface

Compatibility: Works with other airMAX AC devices for mesh networks

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ubiquiti NanoStation 5AC (5.8GHz) Wireless Bridge & WiFi AP”

There are no reviews yet.

SHOPPING CART

close
Let's Chat!